online device monitoring

To know what is inside

›› More details

Fast track details

Linux

Do following steps to add your DD-WRTv24 for monitoring:

  1. Prerequisites
    • Public IP on your device or configured port forwarding so that snmp is accessible from odmon.com servers
    • Installed SNMP software

  2. Configure SNMP service. Edit needed fiels e.g. /etc/snmpd.conf and configure read-only community. It will probably be public by default


  3. Start SNMP service. On most systems execute command as root:
    /etc/inist.d/snmpd start

  4. Enable odmon.com queries. Execute following command as root:
    /usr/sbin/iptables -I INPUT 1 -p udp --dport 161 -s 188.124.160.10 -j ACCEPT
    Add this firewall statement to startup scripts, otherwise it will be lost after reboot or firewall restart

  5. Test SNMP.
    After reconfiguring Your device please do the snmp test to make sure it will be working correctly.
    For security reasons it is allowed to query only system description (sysDescr, OID .1.3.6.1.2.1.1.1.0) standard value.
    Please specify hostname, snmp community and snmp version
    IP or hostname:

    or
    : Use my detected IP
    54.198.28.190

    Community:
    SNMP Version